More options
Z translators
Z translator drawing
Z translator
| Size base flange | Size top flange | Travel | ID bore | Compressed length | P/number |
|---|---|---|---|---|---|
| CF63 | CF40 | 150 mm | 38 mm | 81 mm | 5-MT-0400 |
| CF63 | CF40 | 200 mm | 38 mm | 89 mm | 5-MT-0401 |
| CF63 | CF40 | 300 mm | 38 mm | 104 mm | 5-MT-0402 |
| CF63 | CF40 | 400 mm | 38 mm | 119 mm | 5-MT-0403 |
| CF63 | CF40 | 500 mm | 38 mm | 135 mm | 5-MT-0404 |
| CF63 | CF40 | 600 mm | 38 mm | 150 mm | 5-MT-0405 |
| CF63 | CF40 | 762 mm | 38 mm | 173 mm | 5-MT-0406 |
| CF63 | CF40 | 914 mm | 38 mm | 196 mm | 5-MT-0407 |
| Material: | |
|---|---|
| Body: | Stainless steel - anodized Al |
| Bellow: | AM-350 edge welded |
| Vacuum: | 10-11 mbar |
| Temperature: | 150°C (210°C intermittent) |
DC stepper motion actuated available upon request, please contact our sales office.
These Z translators can be used either as a standalone Z axis translator or in combination with an XY platform to produce a long travel XYZ manipulator that is both rigid and cost effective.
Despite their modest price, these Z translators will provide years of trouble-free service, especially if the simple maintenance is performed.
These Z translators feature precision ground guide rods that are fully supported the entire length of travel. This feature is not found on many other brands. This provides even greater stability and rigidity, especially on long travel models.
Z translators with strokes of up to 152cm are available, and can be mounted either horizontally or vertically.
The lower flange can be fitted with support guides for long sample probes. This significantly reduces sag and vibrations in things like long, slim LN2 dewars, sample holders and intro rods. The support bearings are vented and allow clearance for thermocouple and power wires.
Options include both stepper motors and DC motors. Both motor options include limit switches.
The DC motor option includes a hand held forward/ reverse switch and a variable speed control. These Z translators have been designed to allow motors to be easily added in the field, thereby avoiding time consuming and costly factory returns.
Custom configurations such as CF100 base flange and CF40 top flange are available upon request.
Please contact our sales office for further information.