More options
CF16 compact Z translator
CF16 compact Z translator drawing
CF16 compact Z translator
CF16 compact translator
| Size | Travel | ID bore | Compressed length | P/number |
|---|---|---|---|---|
| CF16 | 12,5 mm | 16 mm | 62,5 mm | 5-MT-0220-12 |
| CF16 | 25 mm | 16 mm | 62,5 mm | 5-MT-0220-25 |
| CF16 | 50 mm | 16 mm | 75 mm | 5-MT-0221 |
| CF16 | 75 mm | 16 mm | 87 mm | 5-MT-0222 |
| CF16 | 100 mm | 16 mm | 100 mm | 5-MT-0223 |
| CF16 | 150 mm | 16 mm | 125 mm | 5-MT-0224 |
| Material: | |
|---|---|
| Body: | Stainless steel - anodized Al |
| Bellow: | AM-350 edge welded |
| Vacuum: | 10-11 mbar |
| Temperature: | 150°C (210°C intermittent) |
DC stepper motion actuated available upon request, please contact our sales office.
This range of DN16CF Z translators has cantilevered flange supports with wrap around flange brackets (see drawing). A total of six locking screws (three for each flange) hold the flanges within the brackets.
The advantage of this design is that these screws can be loosened, even while the translator is installed, and the actuator portion of the translator can be repositioned radially around the flange.
This allows positioning of the translator to clear other equipment. The guide rods and actuation screw are set back from the flange to give maximum access to the flange bolts. Despite their modest price, these will provide years of troublefree service, especially if the simple maintenance is performed. Bearings are lubricated with MoS2 grease for low friction and long life.
All parts are field replaceable. All translators are also available with long strokes, motor drives, linear encoders, tapped flanges and special height.
Custom versions can be made upon request.
Please contact our sales office for further information.