You are here:
Molecular Sieve>Molecular Sieve trap
More options
Molecular Sieve trap
Fig.1
Fig.2
Fig.3
| Fig. | Flange | A | B | C | Element | P/number |
|---|---|---|---|---|---|---|
| 1 | KF16 | 170 | 101 | 60 | 7-VA-0116 | |
| 1 | KF25 | 170 | 101 | 60 | 7-VA-0117 | |
| 1 | KF40 | 164 | 101 | 80 | 7-VA-0118 | |
| 1 | KF50 | 164 | 101 | 80 | 7-VA-0119 | |
| 3 | Zeolite charge KF16 & KF25 | Zeolite | 7-VA-0104 | |||
| 3 | Zeolite charge KF40 & KF50 | Zeolite | 7-VA-0105 |
| Material: | |
|---|---|
| Body, flanges & buffle: | AISI 304L Stainless steel |
| Seal: | Buna N |
| Trapping media: | Synthetic zeolite |
| Voltage: | 230 V |
| Heater 230V: | 75 W |
| Vacuum range: | up to 1x10-8 mbar |
| Temperature range: | 250°C |
CF ports available upon request. Please contact our sales office
Full specifications here
To avoid oil saturation, the filter must be baked at 250°C frequently following the work cycles
The molecular sieve traps provide a rechargeable shield within your vacuum system. These traps can protect your system from backstreaming pump oil and/or your pump from water created upstream within your system. The design of the molecular sieve traps includes a heating element that allows the trapping element to be refreshed once the zeolite has become saturated with water. These traps have an in-line port design for installation and a simple clamped fill port design to ease element recharge.