You are here:
Roughing components>Up-To-Air Valves
More options
Up-To-Air Valves
Fig.1
| Flange | Mount | Tube | P/number |
|---|---|---|---|
| KF16 | Center | 6.4 mm | 7-UV-0100 |
| KF25 | Center | 6.4 mm | 7-UV-0101 |
| KF40 | Center | 6.4 mm | 7-UV-0102 |
| KF50 | Center | 6.4 mm | 7-UV-0103 |
| CF16 | Center | 6.4 mm | 7-UV-0104 |
| CF40 | Center | 6.4 mm | 7-UV-0105 |
| CF16 double sided | Side | 6.4 mm | 7-UV-0106 |
| CF40 double sided | Side | 6.4 mm | 7-UV-0107 |
| Material: | AISI 304L |
|---|---|
| Sealing: | 1/4" bellow |
| Vacuum range: | 1x10-8 mbar |
| Temperature range: | -60°C to 315°C |
Installation of an up-to-air valve allows you to vent your chamber to atmosphere or backfill your chamber with the inert gas of your choice. Up-to-air valves are available in two mounting configurations: center-mounted or side-mounted. Center-mounted valves are welded to the flange, whereas side-mounted valves are sealed to a female NPT port installed on the circumferential edge of a double-sided CF flange. Up-to-Air valves are fitted with ¼” ports, are manually actuated, and are bellows sealed. The standard port termination on the downstream side of the valve is tube end. Please contact the factory if a Swagelok, VCR, or other configuration is required.